Get the latest price?

Automatic bowl cutting machine operation process and cleaning precautions

16-09-2019

   The automatic bowl cutting machine has high cutting efficiency and is widely used in the food industry. Today, the editor will talk about the operation process and cleaning precautions of the automatic bowl cutting machine. I hope to help everyone. The details are as follows.


  Automatic bowl cutting machine operation process


  First of all, turn the rotary knife of the automatic bowl cutting machine to the first speed, the rotary knife starts to rotate, then rotate the “rotation pot” to the first speed, and the rotary pan starts to rotate. At this time, the material can be added. At this time, the automatic bowl cutting machine can be added. Stir.


  Then, slowly increase the speed of the knife and adjust the speed of the automatic bowl cutter to the pan as required. If vacuum is used, vacuum can be applied after the front cover is reset.


  At the end of the work, the automatic bowl cutting machine "turning pot" is stopped first, and the "turning knife" is stopped step by step according to the principle of "first open the knife, then open the pot, first stop the pot, then stop the knife". In case of special circumstances, press the “Emergency stop” button to stop the rotary cutter according to the deceleration time set by the inverter, and the pot will stop automatically. At the bottom right is the vacuum, the air switch, the left side is vacuum, and the right side is inflated. The upper right is the front and rear cover switches, controlled by the hydraulic system. After inflation, the vacuum in the fully automatic bowl cutter can be turned to zero before the front cover can be opened. After the material particle size reaches the requirement, it can be discharged. Place the container under the sprue. Holding the handle of the discharger, the discharge tray is placed in the rotary pan, and the discharge tray can guide the meat into the preset container. After the discharge is completed, the discharge device is returned to the original position, and the discharge tray automatically stops rotating. 


        Automatic bowl cutting machine


  Automatic bowl cutting machine cleaning precautions


  The following points should be done when cleaning the fully automatic bowl cutter:


  1. When cleaning the automatic bowl cutting machine, it is necessary to ensure that the cleaning work is effective. Many operators use the water to wash the automatic bowl cutting machine after the automatic bowl cutting machine stops working. This behavior is prohibited. . Because such cleaning is an ineffective cleaning job for fully automatic bowl cutters. It also causes the internal parts of the fully automatic bowl cutter to accelerate rust.


  2. To select a certain amount of detergent, after using water, use a brush or other soft wool tool to clean the automatic bowl cutter. Because the automatic bowl cutting machine is mostly mixed with meat, the oil contained in the meat will stick to the automatic bowl cutting machine. The role of the cleaning agent is to make the grease clean.


  3. cleaning the fully automatic bowl cutting machine, also need to use clean water to clean the automatic bowl cutting machine three times, in order to ensure that the cleaning agent used is completely washed away by water. If the cleaning agent is not cleaned properly, it will cause corrosion of the fully automatic bowl cutting machine.


  4. After cleaning, the most important steps should not be forgotten. Be sure to do the drying process of the automatic bowl cutting machine. If the automatic bowl cutting machine is not well dried, it will cause different degrees of rust, which will indirectly cause the failure of the fully automatic bowl cutting machine during use.


  The above is about the operation process of the automatic bowl cutting machine and the cleaning precautions. I hope everyone can understand the operation process of the automatic bowl cutting machine and the cleaning precautions.


Son fiyat olsun? En kısa sürede cevap vereceğiz (12 saat içinde)